Core Barre Head Complete Nwl Hwl Pwl New Design Drilling Tool From Wuxi

• Customization: Available
• Type: Core Drill
• Usage: Well Drilling
• Model NO.: NAU(NQ), HAU(HQ), PAU(PQ)
• Certification: Dcdma
• Transport Package: Standard Export Packing
• Trademark: AU-PROSPECT
• Origin: China
• HS Code: 84314320
• Production Capacity: 5000PCS/Year

Product Description

Product Description

Drilling tool assembly (P, H, N and B)
Relevant description of products:
Retrieve the inner tube with an overshot without lifting out the whole rods string to obtain the core, the wireline coring system lifts the underground core sample out of the borehole through the overshot to take back the entire inner tube and conduct sampling analysis. This improves productivity of the work site and guarantees safety of core sample during drilling down.
The system is realized through a fully independent inner tube. During its working, the inner tube does not connect with the overshot but locates at the bottom of the coring drilling rod directly (behind the coring drilling bit). An assembly device is installed on top of the inner tube, which includes coring and recycling functions. When the inner tube is full of core sample, the overshot is placed to the bottom from the borehole through a steel wire rope and lifted out by a winch. After the inner tube assembly is lifted to the surface, an empty inner tube is placed to the bottom of the hole to recover the drilling. This improves well drilling efficiency.
Our company provides core barrel assmeblies of different diameters to meet customers' demands. The wireline coring system is applicable for most drilling conditions and standard DCDMA hole sizes (B, N, H and P).
Currently, the company provides two models of wireline coring systems: double-tube and triple-tube
Core barrel assembly: It consists of inner tube and outer tube groups.
The inner part consists of the following parts: spearhead assemly, retrival components, core sample collection component, landing shoulder, stop ring and other parts.inner tube group, independent from outer tube group, collects core sample sample during well drilling.
The outer tube part consists of parts , which includes locking coupling, adapter coupling, outer tube, etc. The outer tube group that is kept at the bottom of the hole all the time holds the inner tube assembly during drilling.
The triple tube coring system AU3 has the same components as the dual-tube. And its interior has a third tube that is known as liner tube of the inner tube.
Liner tube of the inner tube is placed in the inner tube. The triple tube system can realize overall recovery ratio of core sample when drilling stratum with coal, clay or bigger crack. The liner tube or split tube keeps the core sample at its receiving status to collect or load and store easily.
Only N, H and P sizes are available for the triple tube coring system.

Detailed Photos

NAU(Q) HEAD ASSEMBLY
NO.	ITEM DESCRIPTION	PART NO.
0	Head Assembly	20702000
1	Spearhead Point	20701001A
2	Detent Plunger	20701002A
3	Compression Spring	20701003A
4	Spirol Pin	20701004A
5	Spearhead Base	20702005
6	Latch Retracting Case	20702006
7	Spirol Pin	20702007
8	Nyloc Bolt	20701008
9	Washer	20702009
10	Latch Compression Spring	20702010
11	Upper Latch Body	20702011
12	Latch	20702012
13	Link	20702013
14	Spirol Pin	20702014
15	Stainless Steel Ball	20701015
16	Landing Indicator Bushing	20701016
17	Shut-off Valve Hard	20702017
18	Washer Nord-Lock	20702018
19	Landing Shoulder	20702020
20	Lower Latch Body	20702021
21	Hex Nut	20702022
22	Spindle	20702023
23	Valve Adjusting Washer	20702025
24	Thrust Bearing	20702026
25	Spindle Bearing	20702027
26	Hanger Bearing	20702034
27	Compression Spring	20702028
28	Stover Lock Nut	20702029
29	Inner Tube Cap	20702030
30	Grease Fitting	20701031
31	Check Valve Body	20702033

HAU(Q) HEAD ASSEMBLY
NO.	ITEM DESCRIPTION	PART NO.
0	Head Assembly	20703000
1	Spearhead Point	20701001A
2	Detent Plunger	20701002A
3	Compression Spring	20701003A
4	Spirol Pin	20701004A
5	Spearhead Base	20703005
6	Latch Retracting Case	20703006
7	Spirol Pin	20703007
8	Nyloc Bolt	20701008
9	Washer	20703009
10	Latch Compression Spring	20703010
11	Upper Latch Body	20703011
12	Latch	20703012
13	Link	20703013
14	Spirol Pin	20703014
15	Stainless Steel Ball	20701015
16	Landing Indicator Bushing	20701016
17	Shut-off Valve Hard	20703017
18	Washer Nord-Lock	20703018
19	Landing Shoulder	20703020
20	Lower Latch Body	20703021
21	Hex Nut	20703022
22	Spindle	20703023
23	Valve Adjusting Washer	20703025
24	Thrust Bearing	20703026
25	Spindle Bearing	20703027
26	Hanger Bearing	20702034
27	Compression Spring	20703028
28	Stover Lock Nut	20703029
29	Inner Tube Cap	20703030
30	Grease Fitting	20701031
31	Check Valve Body	20702033

 

PAU(Q) HEAD ASSEMBLY
NO.	ITEM DESCRIPTION	PART NO.
0	Head Assembly	20704000
1	Spearhead Point	20701001A
2	Detent Plunger	20701002A
3	Compression Spring	20701003A
4	Spirol Pin	20701004A
5	Spearhead Base	20703005
6	Latch Retracting Case	20703006
7	Spirol Pin	20703007
8	Nylon Insert Machine Screw	20704036
9	Nyloc Bolt	20701008
10	Washer	20703009
11	Latch Compression Spring	20703010
12	Upper Latch Body	20703011
13	Latch	20704012
14	Link	20703013
15	Spirol Pin	20703014
16	Shoulder Bolt	20704035
17	Dry Hole Valve Holder	20704037
18	Threadged Ball	20704015
19	Landing Shoulder	20704020
20	Landing Indicator Bushing	20701016
21	Fluid Relation Spring	20704038
22	Lower Latch Body	20703021
23	Washer Nord-Lock	20703026
24	Hex Nut	20703022
25	Spindle	20704023
26	Valve Adjusting Washer	20704025
27	Shut-off Valve Hard	20704017
28	Washer, Tepered	20704039
29	Thrust Bearing	20703026
30	Spindle Bearing	20704027
31	Grease Fitting	20701031
32	Compression Spring	20704028
33	Washer	20704040
34	Stover Lock Nut	20704029
35	Inner Tube Cap	20704030
36	Copper Bushing	20704041
37	Stainless Steel Ball	20701015
38	Check Valve Body	20704033
39	Spirol Pin	20704043

Packaging & Shipping

 

Certifications

Our Workshop

    We have successively put into operation the international advanced intelligent production lines,it has two intelligent production lines with an annual output of more than 150,000 drill rods.
In the future,there will be 8 intelligent production lines in the second and third phases with an annual output of more than 600,000 drill rods.
    Our core productivity is supported by America Inductotherm heat treatment equipment and MAZAK CNC machine tools,Siemens control system.We will achieve our goal of the overall production intelligence in our factory in next 3 years which will be the standard equipment of Au-prospect.

 

Our Exhibition & Our Partners

FAQ

Q1. Where is your factory?

A1: Our factory is located in Wuxi, Jiangsu, China, it takes only about 2 hours driving from Shanghai.

Q2. How do you control quality?
A2: ISO9001 has been passed. Mill Test Certificate is supplied , meanwhile the Third Party Inspection is available according to customers' requirement.

Q3. What are the advantages of your company?
A3: Our core productivity is supported by American Inductotherm heat treatment equipment, MAZAK CNC machine tools, and Siemens control system.

Q4. Can you arrange the shipment?
A4: Yes, of course, we have our forwarders which has cooperated with us for years.

Q5. How about the delivery time?
A5: It will be decided by the orders. Normally within 3 days after receiving your advance payment if we have stock.

Q6. Can you provide sample?
A6: Small samples in store can be provided for free